There are certain things in life that are more rewarding than having your TV off its lousy stand and on the wall. In today’s article, we will see how to mount a tv on the wall without studs. Now let’s get it fixed, even though you don’t even have any studs to stick to it.

Yet what about if you don’t have studs on your wall? How if your annoying landlord insists no drilling is allowed on the walls? Or, how to mount a tv without amount?

Previously, you might have been left with your TV placed on a giant piece of furniture, but you don’t need it anymore. Nowadays, we have a drywall mount that has more gives us the ability to support TVs up to 100 lbs. This covers virtually every TV screen under 100 lbs. Now let’s see how to hang a flat-screen tv without amount. This guide is crafted for you by tv wall mounting team and will teach you how to install tv wall mount easily.

Most TV mounts are intended for drywall, which makes DIY items simple, but requires the presence of studs, of course. The vertical bits of wood that make up the structure that holds your walls are wall studs. The drywall itself is relatively brittle, so it might involve a break in the wall and a TV on the ground to attempt and help the mount and TV on drywall alone. The studs have a robust anchor point that guarantees that the mount and TV remain in place.

Sadly, the wall that you want for your TV does not have studs, depending on your living room and the design of your house. The good news is that with Install-No It’s Stud TV Wall Mount Setup, which sits on your wall like a picture frame, you can still mount your TV amid the hollow wall anchors. 

So, How To Mount A Tv On The Wall Without Studs? (Studless TV Mount)


Mount A Tv On The Wall Without Studs

Lets first see what you need to mount a tv on drywall:

TV Wall Mount Anchors

The anchor is one of the simplest ways that allow us to hang anything in the walls without a stud. These help us to prevent the screws from falling out of their holes or even destroying your drywall.

Toggle Anchors

Toggle anchors or toggle bolts look like regular screws, however, they come with a butterfly toggle at the end. When you place them in the wall, the toggle anchors serve by attaching to the back of the drywall. Pulling at the screw or otherwise applying some kind of external force has little impact, as the toggle causes the whole sheet of drywall to respond rather than just the crumbly center. This means that it’s the distinction between pulling the entire wall and removing a single screw.

Molly Bolts

They are a little difficult than using most drywall anchors, although they are highly strong and well designed for medium to large loads. They come in pointed and non-pointed forms. There is a sharp tip in the pointed molly bolts and can be mounted with some soft yet strong taps with a hammer.

With non-pointed molly bolts, which are ideally adapted to plaster walls, you need to first cut the mounting opening.

These bolts remain thin when left untightened, but once fixed in the walls, the sleeve extends, providing an anchor at the back of the drywall, which is a mechanism identical to the toggle anchors. When you firmly fixed the molly bolt, the screw may be withdrawn and substituted with the screws for your TV mounting kit.

Mounting Plates

Take into consideration, together with these drywall anchors, the use of a metal or plywood mounting plate or brace. You can position mounting plates behind the TV and bolt them into the wall utilizing each of the anchor screws mentioned above.  You can then mount the base of your TV wall mount will then be mounted onto the mounting board. The concept of the mounting plate is that it provides a few additional focal points while having a wider surface area to support the weight of the brace and your TV.

When you’re concerned about appearance, make the mounting plate smaller than the TV size so the monitor covers the metal or the plywood. If this is not achievable, the mounting plate can always be painted or stained to mask it, or an additional level of detail can be added for tv wall mount drywall with no studs.

With more than 12 years of expertise in delivering high-quality TV bracket and installation services, we are certain that you will be delighted with the outcomes of our TV wall mounting in Toronto services. It is possible that we may install a huge television on the wall or suspend it from the ceiling for the sake of your comfort and safety. Every television we install is firmly attached to the wall and securely fastened to the wall to ensure that you have the best viewing experience possible. Businesses of many types, including offices, restaurants, pubs, and places of worship, rely on us to offer commercial cleaning services to them.

Ceiling Mounts

Although not as widespread as standard wall mounts, trying to mount your TV from the ceiling is yet another alternative, if there are no studs in your walls. While this can become a little more complex and often not practicable method, almost all ceilings have beams or joists that serve the same purpose as studs. You will require longer screws to reach joists based on the layout of your house, while these joists may be more spread out than you expected, they will be in there.

What to Keep in Mind

Using anchors and mounting plates are actually a secure and relatively safe method to keep TV wall mounts whenever the walls do not have studs. Although the procedure is fairly easy, here are some places which you should remember:

  • Be aware of the weight of your TV

Please ensure the anchor screws you select are classified as carrying the weight of your TV.. Weights can vary based on the model of your TV, however typical 32-inch TV typically weighs between 25 and 30 lbs. That means there would be more weight on a larger screen which requires you to check the maximum load for the anchors you chose.

  • Be careful of the quality of your wall

If you hang tv on drywall that is old, the best wall anchors won’t do any good. Walls that look weak can actually fold and bend under the weight of your television, possibly breaking somehow.

We constantly maintain the highest level of quality in all of our painting services as a local home painting Toronto company. Our professional painters have undergone comprehensive training and are Canada’s premier painter business, with over ten years of expertise to back up their superior craftsmanship.

Now let’s See How To Mount A Tv Without Studs

  1. Start attaching brackets to the back of your Television

A number of TV mounts do not have the hardware to connect to all televisions. To maintain consistency with all the top TV brands we have a lot of screws into each mount. This covers Samsung, Vizio, Sony, TCL, and several more. This would work essentially if it has mounting holes.

Apparently, mounts on drywall TV can tip down as nothing supports the bottom of the screen. This eliminates glare and is new in most tv installations.

  1. Nailing The Wall Plate

Here’s the fun part. It won’t take a very long time. There’s also a built-in standard of the bubble and you can’t screw things up. Every time, you’ll end up with a beautifully straight-mounted TV.

  1. Attaching the TV

Simply hang your TV from the wall plate. Locking this TV on the wall is one of the things that’s most strangely rewarding.

How to fix a TV mount that doesn’t line up with studs?

If your TV wall mount studs not centered, the alternative is to use any metal strapping that can be fixed to all 3 studs behind the spot where your TV will be mounted. The mount can then be fixed to the metal, enabling you to select precisely where you want it.

Another solution to the issue is that you actually do not secure the metal to the center stud and leave it bolted to either side. You may be concerned that this will make it easier for the metal straps to “sag” and/or get stressed over time since the TV would remain in the center of them. Fortunately, Oled TV isn’t really heavy.

How to mount TV above fireplace no studs

Next, you need to ensure that behind the drywall you have some sort of backup for good. Besides that, make sure your fireplace unit is quite well ventilated. If a lot of heat increases past the mantle, the TV lifetime would be dramatically shortened.

Snaptoggle toggle bolts often work exceptionally well. There are a lot of sizes, just select the ones that suit the weight of what you’re mounting. If you want to take others’ suggestions and install plywood first, add the weight of the plywood along with the television.

To add a piece of plywood to the drywall, you can also use toggle bolts and lag your mount therein. To prevent it from becoming an eyesore, just paint the plywood or something. This would help you out of the mess of making the drywall holes.

Mounting TV on plaster wall

To mount a TV on a plaster wall, you will need:

  • Three pieces of plywood or particleboard that are 3/4″ thick and at least as wide as the distance between the top and bottom of the TV.
  • Eighteen lag bolts with washers and nuts.
  • A cordless drill or an electric screwdriver to drive screws into the wall for mounting.
  • A level to make sure your TV is mounted straight.

Drill holes in the back of the board that are high enough so they don’t hit any studs on the wall or other framing. If you have them, use a stud finder to locate any studs before drilling into your walls. Drill holes every 4 to 6 inches. Attach the first board to your wall by driving a lag bolt through each of the holes; use washers and nuts on both ends. Follow this step for the other two boards as well.

Vary between pieces with larger gaps and those with smaller gaps so that each piece is securely fastened to the wall, but still allow the boards to flex if you tap on them.

Add a wood center support board in between each board and screw the base of your TV to these, instead of directly onto the wall. This step will not only give you added stability for your TV, but also provides room to tuck excess wires behind whichever board they are connected.

To hang the TV to the center boards, use the same drill/screw method.

Wrap any excess cable with wire channeling clips or hide it behind wall panels (if possible) for a clean-looking installation. Screws and washers will be required for this step as well. Toward the bottom of your TV try to hide any wiring so that it is out of view.

Make sure your TV is straight and level by using a bubble level on the wall, then anchor your screws into the stud, if possible. To do this you will need to use an electric screwdriver or drill with a Phillips head attachment. Make sure each board is secured tightly to the studs behind it, as well as a center support board on the part that your TV will rest on.

If you are unable to attach your TV to a stud, use drywall anchors instead of lag bolts. Drywall anchors can be found near the section where picture hanging hardware is sold. They vary in size, so pick one based on the weight of your TV.

The placement for drywall anchors can vary, too, so make sure to read the directions that come with them to determine where they should go.

-Hang a wire channeling clip on the back of each board and secure any excess cables into these clips by either using twist ties or leaving slack in your cords and wrapping them around the channeling clip.

Space out your cords evenly so that they don’t rise up above the boards or, in a worst-case scenario, hang down below the bottom board. This level of detail isn’t necessary when you are mounting a TV on plaster walls because they are normally thin enough to sit flush with the wall, but is very important if you are mounting your TV on a plasterboard partition wall. In this case, the best method is to secure small metal strips into slots cut into each board before hanging them and use these as anchors for wires going behind the board. If you do not have access to this type of board, there are plenty of commercially made wire channeling clips available that will do the job.

This method allows you to hide many of your wires behind the board and keeps them out of sight from anyone standing in front of the TV. All you have left between your wall and TV is an electrical outlet or two, which are relatively easy to cover up with a plastic box made for this purpose.

The little details like this are easy to overlook but make a big difference in the aesthetics of your living space. Be prepared to spend at least three to four hours on your installation if everything goes as planned, and plan for some mistakes that may cause an extra hour or two of work here and there. The end result is well worth the effort, so relax and enjoy.

Read more:

  • TV Mounting Service Toronto & TV Wall Mounting
  • (647) 471-7273
  • Proudly serving in the Greater Toronto Area