Want to mount a TV on the wall? In general, the process usually involves some drilling work in advance. However, what if you want to wall mount a tv without drilling holes? How to studless mount tv without worrying about tv falling off the wall?

But first, can you mount a TV without putting holes in the wall?

Yes, there are a few ways to hang a TV without putting holes in the wall. You can use a mount that attaches to the back of the TV, or use a stand that holds the TV off of the ground. Some people also use shelves or cabinets to hold their TVs.

There are, in fact, several alternatives that you can implement without damaging the wall, such as using adhesives, tv hangers, using a hybrid stand and etc. In the following blog post, we will see if you can mount a TV on brick. So let’s see how to hang a TV on the wall compared to alternatives to wall mounting tv:

So, how to mount a TV without drilling?

Mounting your TV with strong adhesives on concrete or a brick wall is a great method without drilling. You can also use rails and as well as brick clip-on hangers.

Best Ways To Wall Mount A Tv Without Damaging The Wall

Let’s see how to mount a TV on a brick fireplace without drilling:

Using an adhesive TV wall mount

In addition to having a TV mount shelf, by using very solid adhesive tapes or glues, you can even simply stick the TV to the wall without needing to drill holes on it.

Though these are commonly used for photographs or painting, improved adhesives have emerged in the industry and can bear heavy loads. Of course, for your TV, that’s not the best alternative, so you may want to have an expert assessment about how well this would work.

To get started, the surface needs to be prepared first. Carefully measure your TV and label the places on the wall where you are going to place it. Get it level and straight. After the adhesive is fixed, you wouldn’t want the TV to be all twisted.

There ought to be no debris and the wall ought to be clean. You should add the adhesive substance you have following the area that gets dry from the wiping, and push the TV softly onto it. Check the guidance on the product in order to make sure the weight of your TV can be carried by the adhesive.

A non – destructive alternative is adhesive TV hangers, which will help you to mount your TV without damaging your wall. Still, you should remember the pitfalls that can arise at the same time. Adhesives, as described earlier, can be a dangerous choice to consider.

Using Hybrid TV Stands

Hybrid TV stands mean you’re not simply going to mount or install the TV on a wall. This helps you to protect the wall while also helping to save some space.

Usually, these stands are supposed to fit in so that the TV just seems like it has been installed. In addition, for any AV items you might like to place near your television, you also receive a good selection of shelves.

There are several areas where you can conceal all those cables such that the visual effect is much stronger and much more pleasing to the design. With swelling mounts, you can easily get one of these stands, which allows you to move your TV screen whenever you needed.

There are several different forms, colors, and fabrics of these stands, so you can combine yours with the atmosphere in a real way. But apart from acknowledging the visual appeal, remember to take into consideration the height and weight of your TV, since you would expect the stand to be able to confidently carry your Television.

Hardwall Hangers for TV

If your brick wall on the edges of the bricks is damaged and the clips do not fit, you might try inserting hard plastic wall hangers that are cheap but sturdy. Just one issue here is that you need to push them into the brick with these hangers, that might not be something you’d really like to.

For you to tap all the nails in, the brick has to be flexible enough. And you must be able to do so. If you rent the property or just don’t want to damage the brick, this choice is not feasible. Remember that, while the spaces may still be visible, you can fill the gaps afterward.

You would be glad to hear that the nails are slim and that they’ve been stuck to the hangers should you consider this alternative feasible. Since the nails are just one-sixteenth of an inch thick (1.5 mm), the gaps you left behind after the process won’t be that visible.

Using a rail to mount your TV

Generally, rails are often used for photograph-hanging, but you may even be able to make them functional for your TV. It will enable you to leave your wall of brick pristine, and when you wanted to move your TV around, you will notice that they’re really versatile.

The rails sit on the wall horizontally, and they come in a variety of colors, so you can select a design that suits you best. The most common ones are wooden railings, and they can look fantastic against the brick, but you can also have metal ones too.

To keep it from falling, you may need to secure the rail to the wall. Once done, indeed, your television should generally be very protected from falling. You may simply add an additional adhesive measurement, but that will now allow you to move your TV against the wall.

Still, finding a specialist on this one would be a smart option, since they would know better how to turn the rails usually used for the artwork into rails so that they can be utilized for your new TV.

You may also need to consider your TV’s weight and height into consideration; else, the installation can be unsafe.

Using a screwless TV wall mount (temporary TV mount)

Most flat-screen TVs can be hung in less time than they take to unpack. It’s made out of two aircraft-grade metal brackets that interlock. One bracket mounts to the back of the TV, while the other mounts to the wall. A 1″ clearance from the wall allows simple access and space for wires and cables once mounted. To prevent wall damage, the wall track features a foam backing. All that’s left are microscopic pinholes that may be readily covered up once they’ve been removed.

Brick Clamps

For quite a period of time, people used brick clamps as a means to mount a TV without drilling into the wall. Therefore, you may want to think about using them for your issue as a fix.

You’ll need to calculate the mortar’s depth and then buy clips that will fit with that. Find out the height, which you want your TV to be hung.

Just a few of these clamps can carry an item up to 13 kilograms, but you’ll need additional clamps if your TV is heavier.

The great news is that nowadays most TVs are not that heavy, which makes this option to be considered as a good solution.

The clips include the side of a saw-tooth which is used to carry the brick. Because not all of them can fit your brick wall, you have to spend a little time doing all the investigation on these clips.

If you’re shopping online, consult with someone at the shop where you expect to order from them, or call customer service. These experts may give a good indication of what sort of brick clamp you will need.

There would need to be straight edges for the bricks, and they should be reasonably well-kept, which implies no sheared points.

Our TV mounting service Toronto is available to you. Television wall mounting and professional TV installation services are available in Toronto at reasonable prices and of great quality. Consider contacting and hiring TV mounters right now to have the best television watching experience possible.

Hire our expert TV installation professionals whether you are seeking dependable residential installations, smartboard installation area design, or just looking for home services projects combination deals reviews to ensure that your installations are flawless.

Does mounting the TV damage the wall?

There is no simple answer to this question since the way in which a TV is mounted can vary significantly, and some mounts are more damaging than others. In general, though, most experts agree that if a TV is mounted properly it should not damage the wall.

The key consideration when mounting a TV is the weight of the display. If the TV is too heavy for the mount, it can cause the wall to crack or even collapse. It’s important to use a mount that is designed to hold the weight of the TV, and to ensure that the screws are securely fastened into the wall studs.

How to Wall Mount a TV Without Drilling Wholes

Mounting TV in the apartment

Mounting a tv on your wall is easy. And your viewing experience will significantly enrich it. As you’re just renting the room, before installing a TV in your apartment, you’ll need to get the go-ahead from your lender.

Can you mount a TV on a brick wall?

Sure. However, hanging a tv on brick involves more preparation, experience, and equipment than mounting tv on a brick wall. Follow this article to learn how to mount a television on a brick wall, allowing you to make the most of your available wall space while also elevating your entertainment experience.

Final thoughts

Mounting a TV on a brick wall can be a challenging task without drilling holes, however, one of these choices mentioned above can actually work for you. Some of them are more intrusive than others, and some of them are better and safer as well. Choosing which alternative fits you and your requirements is up to you.

Contact someone you know, who, without grinding, has already managed to mount a TV to a wall and figure out how they did it. This will allow you to get some practical knowledge beforehand. As you see even if think that hanging a tv without an amount is a hard task, it’s not actually true. 

Also, read:

Tv Stand With Mount: How To Hang Your TV Easily?

Where to Put Cable Box for Wall Mounted TV?

  • TV Mounting Service Toronto & TV Wall Mounting
  • (647) 471-7273
  • Proudly serving in the Greater Toronto Area